| Author | Comment | |||
|---|---|---|---|---|
 Izablue2 |
Hatches |
Lead | ||
|
Posts: 123 12/10/07 09:15:48 |
As we all probbly know, the hatches(or lids) for the lazzaretts and not sealed and allow water and dirt in. After the recent fires in SoCal, the interior of
my lazzarretts were a disaster. The high winds, ash, and dirt just filled both sides. I have looked at the TACO Metal flex trim and think that it might work.
Any thoughts out there or suggestions
Thanks Mark Izablue, #835/3 |
|||
|
|
||||
|
garrywillis |
#1 | |||
|
Posts: 283 12/10/07 11:19:26 Moderator |
Mark,
Yea, I wish the factory would have taken care of this. I have put self adhesive,hi density foam gasket material of various thickness around the perimeter of the openings ever since I have owned the boat and water and dust have not been an issue on the inside. They have to be changed every two years or so depending on usage but they are cheap enough at Home Depot and come in rolls that I cut to fit. An added benefit is if the lid is allowed to slam shut accidently, the gasket will cushion the blow.
Garry
"Breezn" #502 2-Cabin |
|||
|
|
||||
|
Izablue2 |
#2 | |||
|
Posts: 123 12/10/07 12:14:41 |
Garry,
That sound good for me. I forgot about the "slamming." I guess I just got use to it. Mark |
|||
|
|
||||
|
kenfischer |
#3 | |||
|
Posts: 176 12/10/07 22:03:46 Moderator |
Look at McMaster.com for a wide selection of foams. You might also consider a bulb seal, much like a refrigerator. Just thinking out loud here, as I
haven't stared a that problem in person.
Ken Fischer
2005 C42 #906 "Solaria" 3 Cabin Pullman, Fin Keel, Mast Furling Main, 155% Genoa |
|||
|
|
||||
